EBMX 60v53ah Battery (SUR-RON LBX)
EBMX 60v53ah Battery (SUR-RON LBX)
EBMX 60v53ah Battery (SUR-RON LBX)
EBMX 60v53ah Battery (SUR-RON LBX)

EBMX 60v53ah Battery (SUR-RON LBX)

BATT60V53AHSUR

Regular price$1,950.00
/
Shipping calculated at checkout.

  • In stock, ready to ship
  • Inventory on the way

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original undamaged packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at info@zealracing.com. Please note that returns will need to be sent to the following address: 610 West avenue O, Unit 101 Palmdale CA, 93551

If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at info@zealracing.com.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, like custom products or power upgrades (such as Talaria E-Moto Bikes, Custom graphic kits, EBMX Batteries, Any electronic components O.E.M or aftermarket, EBMX controllers, EBMX motors or personalized items). We do not accept returns for hazardous materials (Batteries of any kind). Please get in touch if you have questions or concerns about your specific item. 

Any return requests on electronic components including all Power upgrade parts are subject to approval and will have a 10% restocking fee applied if approved.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

We can process an exchange order but your new exchange item will not ship until the original item purchased has been returned. 


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded (minus your original shipping cost and 10% restocking fee if applied to the specific return items) on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too. 
If more than 15 business days have passed since we’ve approved your return, please contact us at info@zealracing.com.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 NOTICE!

Pre-Orders are currently disabled until further notice. 

EBMX is in the process of redesigning a newer, high quality battery which will be causing current delays on product availability. When we receive notice that EBMX has completed the redesign and batteries are available to ship we will re-open our Pre-Orders. 

For any questions you may have, Please do not hesitate to contact us.

60V 53Ah

EBMX Surron Battery

Would you like nearly double the range of the stock 60V battery using the stock controller and to have all of that extra power in the same space* of the OEM Battery Compartment? Or do you want to run a high powered monster Sur-Ron with up to 15kW of power!?** Well this high powered 60V battery has you covered for both options!
 

Usage Warning:

These high powered controller kits are intended for off road riding using on/off throttle, not continuous throttle applications. Modifying E motos with these controllers and tunes make them illegal to ride on the road. After installing an aftermarket controller and getting a high powered tune, you are running the risk of damaging your motor. Even with our motor temperature protection enabled, it is still possible to damage your motor if you push the motor outside of its limits. To ensure you do not cause damage to your motor, follow the advice below:

  • Do not use wide open throttle for longer than 10-15 seconds. Do not do repeated full throttle runs. 
  • Do not consistently ride the bike in high power modes, only use the power mode you need at the time. 
  • Do not ride for long distances where you are on 3/4 or full throttle consistently for long periods of time.

If you need to use your bike for long rides using consistent throttle then you will need to significantly reduce the power level of the tune to ensure you can ride for stained periods without damage. Just for comparison, the stock bike in Sport mode running at full throttle is running at 5-6kW, after you put on a BAC8000 and high powered battery you will be pushing up to 15kW (3 times the power of the stock bike) and it cannot be expected for this not to take a toll on the motor. Please be mindful and smart when modifying and riding e motos.  

To ensure you have the safest and best riding experience when riding around wet areas, please ensure you follow the instructions below:

  1. Ensure your motor controller is mounted such that the control connection plugs are at the top of the controller.
  1. Use dielectric grease for each of your electrical connectors, especially the ones going into the motor controller. Dielectric grease is meant to be used to help keep out water, dirt and contaminates, it is not to be used to fill up connectors entirely. Please watch some YouTube videos on the proper way to use dielectric great on electrical connectors if you have any questions.
  1. Ensure the brake sensor plugs are disconnected from the bike harness. This can be done by cutting them at the brake levers, or just opening the ignition/USB charger cover and disconnecting the two plugs. Once an aftermarket controller is installed, these brake lever sensors will not work, however if water gets into the system and they are still connected, they are able to short circuit with other pins and cause unintended acceleration and other issues.
  1. Avoid riding in water wherever possible and do not use a hose or pressure washer anywhere near the motor controller when washing the bike.
BATTERY BROCHURE

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)